HOME : ABOUT US : USED MACHINERY : SPECIALS : LEASING : SERVICES : INFORMATION : DIRECTIONS : EMPLOYMENT : CONTACT : OCEANETTES
  steel fab machinery
steel fabricating machinery
steel fabrication equipment
Back to OCEAN MACHINERY : AVENGER CNC Beam Line : LIBERATOR CNC Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling System
OCEAN CLIPPER ANGLE LINE
OCEAN cLIPPER FEATURES
Ocean Clipper Overview
Technical Specifications
VIDEO - Clip Angle Video
Programming Your Angle Line
PURCHASING OCEAN CLIPPER
Ocean Dealers
Financing Your Angle Line
TRAINING AND SUPPORT
Installation and Training
Technical Support & Warranty
Drill Grinding Tutorial Videos
Drill Bit Options and Benefits
SAFETY
Safety Features
MATERIAL HANDLING
Ocean Eliminator Handling System
Ocean Flipper Beam Rotator
STRUCTURAL STEEL MACHINERY

Back to Ocean Machinery

Ocean Clipper Angle Line Specifications

OCEAN CLIPPER SPECIFICATIONS

The Ocean Clipper CNC angle line is simply the most compact and most affordable CNC Angle line available to the small to medium structural steel fabricator. Built in the USA by Peddinghaus, the Ocean Clipper is capable of processing angle up to 6x6x5/8" - see the full specifications below

angle line specs

 

 

Below are the specifications for the Ocean Clipper CNC Angle Line

Angle Sizes

Max Angle Size

6 x 6 x 5/8”     (150 x 150 x 15mm)

Minimum Angle Size

1-1/2 x 1-1/2 x 1/8”    (40 x 40 x 4mm)

Drill One Leg – Round Hole Only

Minimum Hole Diameter 

5/16”

Maximum Hole Diameter 

1-9/16”

Minimum Drill Gauge

0.5”

Maximum Drill Gauge

5.5”

Drill Feed Rate

2-10 ipm 

Punch One Leg – Slots, holes, shapes etc,

Punching Tonnage

75 Tons US  (68 Metric Tons)

Maximum Slot Size

1 1/4” Diameter - Standard (270);

26mm Diameter - Metric (PFP #3);

Punch Cycle time

2 seconds

Minimum Gauges

Using 272 punches, 271 dies

11/16” plus leg thickness for 1 1/2” x 1 1/2” through 2” x 2” angle

1 3/16” plus leg thickness for 2 1/2” x 2 1/2” angle.

1 1/4” plus leg thickness for 3” through 6”angle sizes.

Minimum Gauges

Using PFP#3 punches and dies

15mm (.59”) plus leg thickness for 40mm x 40mm (1 1/2” x 1 1/2”) through 50mm x 50mm (2” x 2”) angle sizes.

24mm (.94”) plus leg thickness for anything over 50mm x 50mm (2” x 2”) through 150mm x 150mm (6” x 6”) angle sizes.

Shear – Cut to Length

Shear Tonnage

100 Tons US  (91 Metric Tons)

Minimum Drop

8.125”

Shear Cycle Time 

5 seconds

Slug Size 

½”

0” with optional single cut shear for up to 4 x 4 x 3/8” angle

Measurement

In-feed Speed (X Axis)

61 FPM (18.5 meters/min.) maximum

Maximum “X” Direction Stroke

50”

“Y” Axis travel

12” starting ½” past datum.

“Z” Axis travel

9” starting ½” past datum

General

Machine Pass Line

45.00”

Weight

Punch Frame/ Shear Assembly - 5,000 Lbs (2258 kg)

X-Axis Assembly - 900 Lbs (408 kg)

Power Unit for In-feed Sections - 300 Lbs (136 kg)  each

Power Requirements

480V

Shop Air 

80 PSI 

Foundation 

4” (100mm) concrete

 

angle line specsNote

angle line specs Clip angles typically comprise a round hole on one leg and a slotted hole in the other leg

angle line specs Because the Ocean Clipper uses a drill on one of the legs, the Ocean Clipper produces clip angles with a round holes on one leg and a slotted (or any shape) hole on the other leg.

angle line specs The Ocean Clipper does not lend itself to production of large volumes of angle that require slots on both legs.

angle line specs However, if this occurs on only a small quantity of your angles, then it is simply an easy operation to punch slots in the near leg leg first, rotate the material and to punch slots in the far leg in a 2nd operation, followed by the shearing operation

 

 

 

angle line specs   angle line specs

 

 

 

Call Ocean Machinery today to get your free video and Literature on the Ocean Clipper CNC Angle Line - Call 1-800 286 3624 or (954) 956 3131 or complete our Ocean Clipper CNC Angle Line information request form.

 

Address 6720 NW 15th Way, Fort Lauderdale FL 33309 USA : Toll Free (800) 286 3624 : Tel (954) 956 3131 : Fax (954) 956 3199

Copyright 2000-2010 Ocean Machinery Inc. : Web Design by AP Marketing & Design : Site Map : Links

OCEAN MACHINERY : AVENGER CNC Beam Line : LIBERATOR CNC Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling System